※ Prototype imagery. The production product may differ.
IVY-HV-01
IVY Skin-Fit Heating Vest
A pullover skin-fit vest whose heating module detaches completely. Take it out and machine-wash the garment.
Quantity
Not on sale yet
We are completing safety certification and initial production. Sales open on the channels below once certified — sign up and we will tell you first.
Channel pages may show a placeholder until sales open.
Details
Product details
IVY SKIN-FIT HEATING VEST
Washable.Actually washable.
The heating module comes out completely.
With the electronics removed, it machine-washes like any garment.
A skin-fit cut with no air gap, so it adds no bulk under outerwear.
Front and back, on body
Four things to remember
Removable Module
Fully removable module
A docking structure that takes the electronics 100% out
Machine Washable
Wash it like a garment
With the module out, it is an ordinary garment
Long Runtime
Up to 8 hours
In-house test, medium heat setting
Recycled Fabric
rPET recycled fabric
Recycled yarn from 15 PET bottles per vest
Why heated vestslast one winter
You can't wash them, they fit loose so heat leaks, and so they die early. The problem was never the heating element — it was the structure.
Left — warm air escaping through the collar and armholes of a loose vest. Right — a close-contact structure holding heat against the body.
What goes wrong
You can't wash it
Heating wires and battery connectors are sewn into the garment. Sweat and site dust stay in the fabric.
It fits loose
An air gap forms between the body and the heating element. Warmed air escapes through the collar and armholes.
It dies early
When heat leaks, the vest runs at maximum output to compensate. The battery drains at that rate.
Core 01
The heating module comes out completely
Most vests marketed as washable still have connectors and wires built into the garment. IVY uses a docking structure: pull the module through the velcro opening and release the connector. With the electronics out, the garment washes like any other.
Core 02
3D skin-fit pattern with no air gap
We removed the zipper and used a pullover construction that follows body contours. The heating element sits against the skin, so heat goes into the body rather than into the air.
Worn under outerwear, the silhouette stays flat.
Core 03
rPET high-tenacity fabric from recycled bottles
Collected PET bottles are shredded, washed and melt-spun into high-purity recycled yarn, then woven at high density with a specialty coating. Each vest uses recycled yarn equivalent to fifteen 500ml bottles. We use GRS-certified fabric.
Double-stitched seams and seam-sealing tape reinforce high-abrasion areas.
Detach, wash, dock
Detach
Open the velcro panel, pull out the heating module and battery, release the connector.
Wash
With the electronics out, the vest is an ordinary garment. Machine-wash it.
Dock
Dock the module again once dry. If a module fails, replace only the module.
Designed for long outdoor shifts on construction and logistics sites.
Specifications
- Material
- GRS-certified rPET stretch fabric
- Construction
- Pullover skin-fit vest + detachable smart heating module
- Heating pads
- Planar elements at chest, shoulder and upper back
- Washing
- Machine-washable with the heating module removed
- Sizes
- S / M / L / XL / XXL
- Runtime
- Up to 8 hours, in-house test, medium heat setting
※ Specifications reflect the current prototype and may change through production.
Product information
- Material
- GRS-certified rPET polyester blend (exact ratio published at launch)
- Colour
- Black
- Sizes
- S / M / L / XL / XXL — see size guide for measurements
- Manufacturer
- IVY INTERNATIONAL INC.
- Country of origin
- Republic of Korea
- Care
- Remove the heating module and battery before washing. Never immerse the module.
- Production date
- Published at launch
- Warranty
- Per applicable law and consumer dispute resolution standards
- Service contact
- Published at launch
※ Disclosure required under Korean e-commerce law. Pending items are updated once production is confirmed.
Frequently asked
- Q. Can it really go in the washing machine?
- Once the heating module and battery are removed, yes — it behaves like any garment. Never immerse the module.
- Q. Under what conditions is the 8 hours measured?
- It is an in-house measurement at the medium heat setting. Runtime varies with the setting and ambient temperature.
- Q. Is it comfortable under a jacket?
- The zipperless skin-fit construction adds almost no bulk.
- Q. If the module fails, do I replace the vest?
- No. The design is module-replaceable — you replace only the module.
- Q. Can I buy it now?
- We are completing safety certification and initial production. Sales open once certified, and sign-ups are notified first.
Before you order
- Images show the current prototype. The production product may differ.
- Runtime is an in-house measurement at medium heat and varies with conditions and setting.
- Always remove the heating module and battery before washing. Do not immerse the module.
- Certifications including safety approval are pending. Sales begin once they are obtained.